Sun Microsystems Sun Expert3D, Installation Manual

Page: 29 / 54

Chapter 2 Installing the Sun Expert3D Graphics Card 13
Installing the Sun Expert3D Card in a
Sun Enterprise 420R System
The Sun Expert3D graphics card connects into the 66Mhz or 33Mhz PCI connector
on the Sun Enterprise 420R motherboard. Best performance is achieved by putting
the Sun Expert3D card into the Enterprise 420R 66Mhz PCI slot. The Sun Enterprise
420R supports up to two Sun Expert3D cards.
1. Shut down your system and remove the Sun Enterprise 450 enclosure.
2. Attach the antistatic wrist strap,
3. If necessary, remove the system rear panel filler panel.
FIGURE 2-9
Removing a Sun Enterprise 420R Filler Panel
4. Insert the Sun Expert3D into the appropriate connector slot on the main logic
board.