Sun Microsystems Sun Expert3D, Installation Manual

Page: 21 / 54

Chapter 2 Installing the Sun Expert3D Graphics Card 5
b. Guide the Sun Expert3D backplate bracket tab into the chassis back-panel
opening; guide the opposite end of the card into the fan bracket card guide so
that the card is aligned evenly with the motherboard slot.
c. Holding the two upper corners of the Sun Expert3D card, push the card straight
down into the slot until it is fully seated.
d. Using a No. 2 Phillips screwdriver, replace the screw securing the Sun
Expert3D bracket tab to the system chassis.
FIGURE 2-2
Installing Sun Expert3D Graphics Card in an Ultra 60 System
6. Replace the Ultra 60 enclosure and go to Chapter 3.
Note –
See “Sun Expert3D Multiview Ports” on page 35 for procedures on cabling
two or more Sun Expert3D graphics cards for multiviewing.
Sun Expert3D card
Screw
Bracket tab