Sun Microsystems Sun Expert3D Installation Manual Download Page 31 | Manualshive

Page: 31 / 54

background image

15

C H A P T E R

3

Installing the Sun Expert3D
Software

This chapter provides the Sun Expert3D software installation information.

Software Requirements

■

Solaris 2.6 Hardware: 3/99, Solaris 7 Hardware: 8/99, Solaris 8 or a subsequent
compatible version of the operating environment

■

OpenWindows™ Version 3.6, 3.6.1, and 3.6.2

■

1.5 Mbytes of available disk space for Sun Expert3D software

■

42-90 Mbytes of disk space for Sun OpenGL for Solaris (up to 90 Mbytes if 64-bit
Sun OpenGL for Solaris is installed)

Note –

If your system does not have the Solaris 2.6, Solaris 7, or Solaris 8 operating

environment installed, you must install it. Use the text command version of

suninstall

to install the required Solaris operating environment. Refer to the main

Solaris installation manuals for this information.

Updated versions of Sun OpenGL for Solaris are available at:

http://www.sun.com/software/graphics/OpenGL/

Note –

Sun Expert3D graphics card support is included in Solaris 8 software. The

Solaris 8 Sun Expert3D software on the CD-ROM contains enhancements and bug
fixes that are not present in the Solaris 8 installation.

«
...
29
30
31
32
33
...
»

Summary of Contents for Sun Expert3D























































Reviews:

No comments

Related manuals for Sun Expert3D

Brand: Brainboxes Pages: 2

Icy Box IB-PCI1901-C32

Brand: RaidSonic Pages: 16

Brand: River park Pages: 33

Brand: Advantech Pages: 72

Brand: Hyundai Pages: 69

Kim Possible: What's the Switch for PlayStation 2

Brand: Disney Pages: 10

Brand: Digitus Pages: 4

Brand: Xomax Pages: 19

Brand: Lava Pages: 4

Brand: StarTech.com Pages: 10

SMART CYCLE EXTREME R2763

Brand: Fisher-Price Pages: 16

NuDAQ PCI-9114DG

Brand: ADLINK Technology Pages: 95

Brand: Audiovox Pages: 20

Brand: SeaLevel Pages: 26

Brand: Lindy Pages: 4

Brand: BASETech Pages: 4

Brand: IBT Pages: 2

Brand: Phonocar Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands