Chapter 1
Installing the Expansion Cabinet
1-7
7. Slide both stabilizer legs under the expansion cabinet.
8. Secure the leveling wrench inside the expansion cabinet.
9. Close the door.
1.6
Installing the Floor Brackets
Skip this section if you have installed the stabilizer legs.
The four floor brackets are used in place of the stabilizer legs when you want to
attach the expansion cabinet to the floor.
Caution –
Do not bolt the floor mounting brackets to the deck plating of a raised
(computer) floor.
Note –
If you are installing the floor brackets over previously installed threaded
rods, you should loosely install the floor brackets to the rods and then to the
expansion cabinet.
1. Remove the three mounting screws on the bottom right of the expansion cabinet
(
FIGURE 1-5
).
FIGURE 1-5
Removing the Mounting Screws