4-1
C H A P T E R
4
Installing and Removing Devices
This chapter explains how to install and remove devices in the expansion cabinet.
Caution –
Storage device systems in the rack must be loaded from the bottom to the
top to keep the rack center of gravity as low as possible. When servicing the rack,
remove only one storage device system from the rack at a time. If possible, remove
systems from top to bottom to prevent raising the center of gravity of the rack. Use
extra caution when moving the rack onto ramps.
4.1
Rackmount Placement
Rackmount placement information for devices that can be mounted in Sun system
and expansion cabinets, is now available through the Web at:
http://docs.sun.com
Click on “Storage and Peripherals” in the Hardware section and open the Rackmount
Placement Matrix.
If you do not have access to the Web, contact your Sun service provider.
Note –
Retrieve the placement information for a device before beginning an
installation.
