Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library Installation Guide
Document 6423015-01, Ver. 1, Rel. 0
June 2002
12
Installing a Rack Mount Library
Installing the Shelves in a Full U Position
0
To install the rack mount shelves in a full U position:
1
Position the left shelf in the rack, aligning the bottom of the shelf
with the pencil marking you made in
2
Use six screws (PN YS42086) and washers (PN 217406) to secure
the shelf to the rack rails as shown in
3
Repeat steps
and
to install the right shelf.
Figure 6 Securing the
Shelf in the Half Position
Note:
In full U position, the bottom of the rack mount shelf lines
up with the bottom of a U.
Note:
Do not tighten these screws fully; you will finish
tightening them later in this procedure.
