Sun Microsystems Netra T4 AC100, Service And System Reference Manual

Page: 16 / 284

xvi Netra T4 AC100/DC100 Service and System Reference Manual • August 2001
TABLE 4-8
OBDiag Configuration Variables 4-19
TABLE 4-9
Netra T4 System-Specific OBDiag Self Tests 4-20
TABLE 4-10 obdiag
Help 4-24
TABLE 10-1
Valid Memory Configurations 10-9
TABLE 10-2
PCI Slot-to-PCI Bus Mapping 10-23
TABLE 10-3
Internal Hard Drive Features 10-24
TABLE 10-4
ISP2200A GPIO Bits 10-32
TABLE 10-5
AC Power Supply Output Values 10-36
TABLE 10-6
DC Power Supply Output Values 10-36
TABLE 10-7
Power Supply Control Signal Levels 10-37
TABLE 10-8
Motherboard Component Functions 10-39
TABLE 10-9
Flash PROM Jumper Settings 10-42
TABLE 11-1
Parallel Connector Pinout 11-2
TABLE 11-2
Serial Connector Pinout, RS423/RS232 11-3
TABLE 11-3
68-Pin SCSI Connector Pinout 11-4
TABLE 11-4
Determining SCSI Bus Length 11-7
TABLE 11-5
TPE Connector Pinout 11-8
TABLE 11-6
TPE STP-5 Cable Lengths 11-9
TABLE 11-7
FC-AL Connector Pinout 11-9
TABLE 11-8
USB Connector Pinout 11-10
TABLE 11-9
Alarms Service Port Connector Pinout 11-11
TABLE 11-10
Lights Out Management Serial Connector Pinout 11-12
TABLE A-1
Netra T4 Field Replaceable Units A-3
TABLE A-2
Netra T4 Optional Components A-4
TABLE B-1
AC Power Supply Input Requirements B-2
TABLE 12-1
DC Power Supply Input Requirements B-3
TABLE D-1
SCCR, J3604, Pin Assignments D-2
TABLE D-2
Internal SCSI Connector, J5002 D-3
TABLE D-3
Internal FC-AL Connector, J2901 D-4