46
Sun Blade X6270 M2 Server Module Installation Guide • October 2010
Note –
The first two options and the last option listed on the screen are not
supported.
■
To display output to the video port, select the third option on the list and press
Enter:
Oracle VM Server - ovs (xen-64-3.4.0 2.6.18-
128.2.1.4.25.eI5ovs)
If you choose this option, you must connect a device to the video connector on
the server.
■
To display output to the serial port, select the fourth option on the list and
press Enter:
Oracle VM Server - ovs serial console (xen-64-3.4.0 2.6.18-
128.2.1.4.25 ->
This is the default option. If you do not select an option on the GRUB menu,
after five seconds, the GRUB menu is no longer available and the system
continues with the output directed to the serial port.
5. Follow the Oracle VM on-screen prompts to configure the Oracle VM Server
portion of the software.
Use the information you entered in the Oracle VM Server worksheet in TABLE 7-
1 to respond to the prompts.
After you have configured the Oracle VM Server portion of the software, the
following prompt is displayed:
Deploy Oracle VM Manager virtual machine?
6. Do one of the following:
■
If you already have an Oracle VM Manager as part of your configuration, enter
n
.
You can register the new Oracle VM Server to the existing Oracle VM Manager.
■
If you do not currently have an Oracle VM Manager as part of your
configuration, enter y to install the Oracle Linux VM Manager and then follow
the on-screen prompts to configure the Oracle VM Manager.
Use the information you entered in the Oracle VM Manager worksheet in
TABLE 6-2
to respond to the prompts.
Note –
If you do not install the Oracle VM Manager and you do not already have an
existing Oracle VM Manager as part of your configuration, you will be unable to use
the Oracle VM Server software.
