36
Sun Blade X6270 M2 Server Module Installation Guide • October 2010
Configuring Server RAID Drives
Configuring server RAID drives is not a supported feature with the preinstalled
version of the Solaris 10 OS. If you need to configure your drives in a RAID
configuration, see the Solaris 10 OS installation instructions in the
Sun Blade X6270
M2 Server Module Installation Guide for Linux, Virtual Machine Software, and Oracle
Solaris Operating Systems
(821-0497).
Default route
Do you want to specify a default route IP address,
or let the Solaris installation program find one?
The default route provides a bridge that forwards
traffic between two physical networks. An IP
address is a unique number that identifies each host
on a network.
You have the following choices:
• You can specify the IP address. An
/etc/defaultrouter
file is created with the
specified IP address. When the system is
rebooted, the specified IP address becomes the
default route.
• You can let the Solaris installation program detect
an IP address. However, the system must be on a
subnet that has a router that advertises itself by
using the Internet Control Message Protocol
(ICMP) for router discovery. If you are using the
command-line interface, the software detects an
IP address when the system is booted.
• You can select None if you do not have a router
or do not want the software to detect an IP
address at this time. The software automatically
tries to detect an IP address on reboot.
• Specify One
• Detect One
• None*
Time zone
How do you want to specify your default time
zone?
• Geographic
region*
• Offset from GM
• Time zone file
Root password
Choose a root password for the system.
TABLE 5-1
Worksheet for Solaris 10 OS Configuration
(Continued)
Information for Installation
Description or Example
Your Answers:
Defaults (*)
