OPERATION & MAINTENANCE
A positive Set Point indicates that the target
for the lift tires is above the bottom of the
blades. Increasing this Set Point will result
in deeper tillage depth.
WING PRESSURE
The folding and unfolding of the wings on
the VRT Renegade is controlled by the
operator through the tractor hydraulic
remote. The IControl App is only used to
adjust the amount of downpressure applied
to the wings.
To make adjustments to the Wing
Downpressure, tap the “Wings” button at the
bottom of the Home Screen.
The current hydraulic pressure, as well as
the Set Point are displayed. Increasing the
Set Point will transfer more weight from the
center frame of the machine to the wings.
If no wing downpressure is desired, the
operator may place the tractor hydraulic
remote int
o “Float”.
Important: The wing circuit must be run
in either constant flow or float. Failure to
do so may result in damage to the
machine.
BLADE ANGLE
To make adjustments to the Blade Angle,
tap the “Blade Angle” button at the bottom
of the Home Screen.
The current angle and the target Set Point
are displayed for both the front and rear
blades. Front and Rear blades can be
adjusted independently. The range of
adjustment available to the operator will be
dependent on the Blade Type selection
made in the Settings page.
ROLLING BASKETS
To make adjustments to the Rolling
Baskets, tap the “Rear Baskets” button at
the bottom of the Home Screen.
2-8
