OPERATION & MAINTENANCE
HITCH ADJUSTMENTS
To make adjustments to the Hydraulic Hitch,
tap the “Hitch” button at the bottom of the
Home Screen.
From th
e Hitch screen, select either “Float”
or “Fixed”. The “Float” setting will allow the
hitch to float for better contouring ability.
The “Fixed” setting allows for weight
transfer fore and aft. Increasing the Set
Point tilts the machine rearward, decreasing
the Set Point tilts the machine forward.
NOTE: Hitch will lock in middle position
when machine is raised and hitch is set to
“
Float
”
.
GAUGE WHEEL ADJUSTMENTS
To make adjustments to the Gauge Wheels,
tap the “Gauge Wheels” button at the
bottom of the Home Screen.
The Gauge Wheels can be used to level out
the machine from side-to-side, as well as
prevent “gouging” when crossing a ditch.
Increasing the Set Point lowers the Gauge
Wheels, decreasing the Set Point Raises
them.
MAIN LIFT/DEPTH CONTROL
The Main Lift of the machine is controlled by
the operator through the tractor hydraulic
remote. The IControl App is only used to
adjust the depth setting. The operator must
manually raise and lower the machine.
To change the tillage depth settings, tap the
“Main Lift” button at the bottom of the Home
Screen.
The current position of the wheels will be
shown, as well as the Set Point. The
current position will show “Lifted” when
machine is completely raised. A negative
Set Point indicates that the target for the lift
tires is below the bottom of the blades
(holding machine out of the ground).
2-7
