SUMMER WAVES 12.5 Si, Installation And User Manual

Page: 12 / 24

9
2.2.1 Status on the display
Auto Mode Defrost Mode Heating Mode Cooling Mode
Timer ON/OFF
2.2.2. Time setting

Press for 5 seconds to enter time setting. 88:88 is flashing on the display

Press and to adjust the time (fast adjusting by continuous pressing).
Then, press to confirm and exit.

In the time setting mode, if no operation for 30 seconds, the previous setting
will be lost and exit automatically.
2.2.3. Timer on and off
NOTE: Do not set timer unless a separate dedicated water pump is going
to be used.

Press the for 10 seconds to enter the timer setting. The
“
ON
”
will be
flashing to enter the Timer ON setting. Press the and to adjust Timer
ON time. You can choose Timer on ( Display: ON ), or Repeat Timer ON ( display:
1 ON ) by pressing . Then press to confirm

When the
“
ON
”
stops flashing, and
“
OFF
”
is flashing, you enter the Timer OFF
mode. Press the and to adjust Timer OFF time. You can choose Timer
OFF (Display: OFF ), or Repeat Timer OFF ( display: 2 OFF ) by pressing .
Then press to confirm

After entering the Time ON/OFF setting, press directly without adjusting