SummaCut cutter
User’s Manual
Setup
1-19
¾
Changing origin.
1.
Press
,
,
and
to change the origin.
The media will move to the new origin, values will appear on the LCD. The X value
is the distance from the original origin; the Y value is the maximum cutting width.
2.
Press
to toggle the Y value between the maximum cutting width and distance
from original origin.
The Y value will toggle.
3.
Press
if the desired origin is reached.
The cutter come online and be ready to receive data from the computer.
4.
Or press
to cancel..
The cutter will move to its original origin and come online.
¾
Extended load.
The function extended load makes it possible to define the limits of the Y axis so that
the cutter can cut outside the pinch rollers. Media has to loaded before this function
can be used.
1.
Press
until ‘extended load’ appears on the LCD .
Extended Load will appear on the LCD.
2.
Press
.
‘Origin’ will appear on the LCD.
3.
Press
or
to define the new right limit (origin).
The head will move to its new origin.
4.
Press
.
‘Size’ will appear on the LCD.
5.
Press
or
to define the new left limit
6.
Press
.
Note:
Tracking is not guaranteed when using this mode
.
