SummaCut cutter
User’s Manual
Detailed Operation
4-10
4.3.16 Autoload
The Autoload option enables the user to the change the vinyl unroll procedure. When
autoload is on, the cutter will automatically unroll the vinyl when needed. When the
autoload option is set off, the operator should manually unroll enough media before
starting to cut. When autoload is set to ask, then cutter will pause after that the pinch
rollers are put down. This gives the user the time to lower pinch roller pressure if
necessary.
The default setting is ON. Tracking is not guaranteed when autoload is set to OFF.
Press
, then use
or
to activate or deactivate the autoload feature. Press
to confirm or
to cancel.
Autoload is default activated.
NOTE:
Tracking is not guaranteed when autoload is set to OFF.
4.3.17 Language
This submenu is used to set or modify the dialogue language on the touch screen.
When the machine is new, it asks the user to choose a language. If this setting was
set to the wrong language, it can be changed with this option.
The information on the touch screen can be displayed in English, French, German,
Spanish, Italian, Polish or Dutch.
Press
, then use
or
to set to the desired language. Press
to confirm
or
to cancel.
The default language is chosen when the cutter is switched on for the first time.
4.3.18 Default Menu
This option defaults all user parameters to factory default.
4.3.19 Menu Units
The setting of these options determines whether the speed and size values are
displayed in the metric measure system or ENG/US measure system.
Press
, then use
or
to set to the desired measure system Press
to
confirm or
to cancel.
The panel units are chosen when the cutter is switched on for the first time.
4.3.20 ROM Revision
Press the button to view information about the cutter’s ROM revision. This information
is often helpful to technicians when diagnosing problems over the telephone.
