![Summa SummaCut D120 User Manual Download Page 49](http://html.mh-extra.com/html/summa/summacut-d120/summacut-d120_user-manual_1390733049.webp)
SummaCut cutter
User’s Manual
Contour Cutting
3-5
3.3 Detailed
OPOS
Operation
3.3.1 Creating the graphic with the markers
1.
Create the graphic and contour cut line(s). For easier handling, place the contour
line(s) on a different layer.
NOTE:
Do not place contour lines along the edges of graphics or the slightest
movement in the media may result in an unsatisfactory cut. Instead, practice one
of the following techniques:
¾
Place contour lines just inside the graphics (recommended) (1).
¾
Place contour lines outside the graphics (2).
¾
Create thick borders around graphics and place contour lines inside these borders
(3).
(1) contour line
inside graphic
recommended
(2) contour line
outside graphic
(3) contour line
inside a thick
border
Contour line on
edge of graphic
2.
If necessary, make additional copies of both the graphic and its associated
contour.
3.
Insert a marker to represent the Origin. The marker must be a black square. Each
of the marker’s four sides should measure 2mm but must not be less than 1.5mm
or more than 10mm. (1=X-size 2=Y-size.)