S CLASS™ 2 cutter
User’s Manual
Basic Operation
2-3
2.1.2
Settings
The Settings button gives access to the main menu. Pressing this button will cause the
cutter to go offline and suspend all operations in progress. The main menu contains all
parameter settings, submenus and access to tests and calibration routines.
The chosen tool will influence the displayed settings.
Parameter Settings
are recognized by the name of the parameter and the value. Press the
parameter to change the value.
Sub menus
are recognized by the group name followed by three points.
Submenus group
certain parameters. Access to some of the submenus will be determined by the plotting
language or tool type.
Tests & calibration routines
are recognized by the name of the test followed by a small
start button. These offer access to the different internal tests and calibration routines. The
calibration routines are used to adjust and fine-tune the cutter for the chosen application.
The internal tests are used for diagnostics.
2.1.3
Actions
The “Actions” button is used to initiate a load sequence, abort the cut in progress, recut the
last file, access the flash drive or cut an internal test.
Velocity
800 mm/s
FlexCut
...
Calibrate knife
Summary of Contents for S Class 2 OPOS-CAM
Page 1: ...User s Manual Rev 3b...
