TFG6800 Series Function/Arbitrary Waveform Generator Users’ Guide
Suin Instruments Co., Ltd
54
The coordinate value of crossing point of green cursor are the setting values in above twosteps if
cursor in X and Y direction is open. The information of this waveform point is displayed in the
upper right corner: D1 (10,1.000V)
Press
〖
Point
〗
soft key, adjust the knob to change the selection point, and the crossing point of the
two cursors will move along the trajectory line of the Sine and show the X andY coordinates of
each waveform point. When the cursor moves to the X-coordinate of 50,the Y-coordinate is 31mV,
as below picture shown.
Press
〖
Point Insert
〗
soft key 5 times continuously, 5 waveform points with voltage 31mV
are added behind of waveform point 50.
Move the X coordinate of the cursor to 26, press
〖
Point Remove
〗
soft key 10 times continuously,
the 10 points from 26 to 36 will be deleted as below picture shown.
3.16.5 Line Edition
