TFG6800 Series Function/Arbitrary Waveform Generator Users’ Guide
Suin Instruments Co., Ltd
52
waveform you want to insert and press the soft key
〖
OK
〗
.
Press
〖
Build Params
〗
soft key and display a setting box. User can set parameters for the
waveform that will be inserted, as below picture shown.
Amplitude
: Amplitude peak-to-peak value of the inserted waveform.
Offset
: DC offset voltage of the inserted waveform.
Phase
: Starting phase of the inserted waveform, taking the waveform itself as a reference
InsertPos
: Inserts the waveform to any position that currently edited arbitrary waveform in (X
coordinate value).
Points
: Total point numbers of inserted waveform, that’s the length of the inserted waveform.
Modify the required parameters, use the original value if there is no modify options.
After finishing setting to inserted waveform, press
〖
Back
〗
continuously, to return to editing
interface of arbitrary waveform, then the selected waveform is inserted to the specified position. If
fail to return to the editing interface of arbitrary waveform, then the edited arbitrary waveform will
be lost.
For example, insert a Sine with 200 points.
Press
〖
Insert Build-in
〗
soft key to enter waveform edition interface, press
〖
Standard
〗
soft key
and select Sine and press
〖
OK
〗
soft key.
Press
〖
Build Params
〗
soft key and display a setting box. Set total point number to be 200 and no
set for other options.
Press
〖
Back
〗
soft key continuously to return to the arbitrary wave editing interface, a Sine with
200 points is inserted on basis of previous linear waveform with 20 points, like below shown.
