TFG6800 Series Function/Arbitrary Waveform Generator Users’ Guide
Suin Instruments Co., Ltd
9
Number, decimal point and minus can be only input by keyboard, not by touch screen.
1.4.3 Knobs Adjustment
: In the real usage, you may have to adjust the signals continuously, at
this time, you can use knobs to adjust. When a parameter is chosen, there will be backlight in it,
and also a white line called cursor position under a number. Press
【
<-
】
or
【
->
】
, the cursor position
will move to left or right. While adjust the knob to right, the number with the cursor position will
add one continuously and can carry up. Adjust the knob to left, the number with the cursor
position will decrease one continuously and borrow from the high position. Using the knob to
input data, the number will take effect on that it changed, and there is no need to press unit. Move
the cursor position to left, you can adjust the data roughly, while move it to right, you can adjust
the parameter detailedly as following shown.
1.4.4 To Select input mode
: For the known data, it is more convenient to input by number keys.
No matter how it changes, it can be input at a time without transitional data generated. For
adjusting the input data or inputting continuously changing data to observe, using knob is more
easily. Users can choose flexibly according to different requirement.
1.5 Basic Operation
1.5.1 Channel Selection
: Press
【
CH1/CH2
】
to select CH1 or CH2 circularly. Press
【
Output
】
, you
