Sugon TC6600 User Manual Download Page 87

Page: 87 / 141

Figure 3-27

is the

CSM Configuration

settings menu:

Figure 3-27CSM ConfigurationMenu

Table 3-32Interface Description of CSM Configuration

Interface Parameters

Function Description

CSM Support

Set whether to enable the module compatibility support.

CSM Module Version

Display the CSM module version.

Option ROM Messages

Select the information display mode of Option ROM. [Force BIOS]- The third

party ROM information will be displayed forcibly during the startup.

[Keep Current]- The third party ROM information will be display only when

the third party vendor sets the device as the ROM information.

Boot Option filter

Select the system boot mode.

You can specify the boot mode by the system setup program, so as to install

the operating system.

●The Legacy boot mode (default) is the standard BIOS level boot interface.
● The UEFI boot mode is an enhanced 64-bit boot interface, which complies

with the UEFI BIOS specification.

Once the boot mode is specified, the system will take the specified boot

mode for the boot, and the operating system that you install in this boot

mode shall set the system boot as the same boot mode (Legacy or UEFI) to

access the installed operating system. The attempt to boot the operating

system from other mode will cause the system fails to start.

Note: The operating system may be installed in the UEFI boot mode only

when

it is compatible with UEFI (such as Microsoft Windows Server 2008 x64).

For the DOS and the 32-bit operating system don't support UEFI, they can

be installed in the Legacy boot mode only.

Summary of Contents for TC6600














































































































































Search results

Summary of Contents for TC6600

Reviews:

Related manuals for TC6600

Brands by name

Popular brands

Sugon TC6600, User Manual

Search results

Summary of Contents for TC6600

Reviews:

Related manuals for TC6600

Brands by name

Popular brands