110
[Note]
The number of actual switch modules are subject to the actual products.
NO.
- indicates slot number of each switch module.
Status
- indicates the working status of each switch module by indicators. Of which, black
indicates the switch module is in non-working status; green indicates the switch module is
working normally; red indicatesthe switch module is working abnormally.
Switch Type
- indicates the type of switch modules.
Power Consumption
- indicates real-time power consumption of switch module.
Temperature
- indicates real-time temperature of switch module.
Click sub option of
“Low-speed Switch Module X” to enter low-speed switch module management
interface. Users can view the current running status of low-speed switch module. The default
running status of Low-speed switch module status is startup. Insert it into chassis which is
powered on, and the management module will send instructions to make it auto-start.
On switch module management interface, users can view and configure static IP address of
switch module, open browser and log in WEB interface of switch module, as shown in
Figure 5-18
.
User name: admin. Password:admin.
Figure 5-18Switch Module WEB Interface
For relevant introduction and configuration of network modules, please refer to function
introduction of network module
.
5.3 Management Module Settings
The drop-down menu of management module settings are mainly comprised of the following 5
options: network settings of management module, factory reset, time&date settings and SMTP
settings.
Network Settings of Management Module
has been introduced in Chapter 5.1. No repeat here.
Factory Reset
click
“Factory Reset” sub option, as shown in
Figure 5-19
. Click
“Restore Settings”
on the page, the management module will restore to factory settings, and all configurations made
by users will be cleared.
