102
it. Click these sub options (or main options without sub options) to view the management
information of the corresponding function modules, which will display in information display
area in the middle, such as module running status and module management control function.
The running status of each specific function module is often displayed by indicators, for
example, the parts indicators below the list menu are used to illustrate the status represented
by the color of indicator.
You can view real-time status monitoring image of chassis in the middle of the interface,
including front panel view and rear panel view. We can carry out simple monitoring towards the
blade and all modules through the two views, the current status of the whole chassis is
reflected in the graph, such as all function modules of blade servers in position (such as power
supply, fan , switch, management module) and the running status of all function modules.
“Management Module Network” option is on the left on the main interface of management
function after login, Click to enter; you can obtain the current IP configuration information of
management module on this interface. Click
“ Edit” option.
After entering edit status, you can set IP information of management module. Settings include:
IP address, subnet mask and default gateway, etc. As shown in
Figure 5-3I
.
Dot-decimal notation is required when setting, otherwise incorrect input format will prompt
when saving changes.
Figure 5-4IP Setting of Management Module
If you click some module by mouse (fan, power supply, switch, etc.), the corresponding
management information of the module will be displayed in the information display area in the
middle, as shown in
Figure 5-5
.
