Rev. 05
– 03/02/2021
Pag. 15/37
Code: 71419 - 71420
CAUTION:
• By pressing the trigger, the propeller begins to rotate and the SCOOTER begins
to advance;
• When the trigger is pulled, the SCOOTER will not start IF the main switch is turned
to one of two speeds.
To change speed of SCOOTER, turn the knob (7 - Fig1): the vertical alignment of the knob sets the Scooter to OFF.
Turn the selector to the right (as shown in below figure) to drive at moderate speed.
Turn the selector to the left to increase the speed.
A tamplography placed next to the knob summarizes what has just been described.
This speed change can be made at any time, even while diving.
When Scooter is not in use, turn off the main switch (6) by turning it anticlockwise until it turns off.
12.
SCOOTER CONTROLS
12.1. SWITCH
The main switch (6 - fig.1) cuts off the battery power supply to the motor.
The use of the switch prevents accidental operation of the SCOOTER.
