Rev. 05
– 03/02/2021
Pag. 14/37
Code: 71419 - 71420
Fig.5
11.
CORRECT USE
After the preliminary operations, proceed as follows to start the SCOOTER:
•
Always make sure that the switch (6 - Fig.1) is in the OFF position,
•
Immerse the SCOOTER in water and check that there are no foreign bodies between the propeller blades.
Otherwise, with the switch in the OFF position, remove the SCOOTER from the water and free the propeller
blades from the foreign object.
In spite the propeller is equipped with a safety clutch to reduce the risk, using the
hands or other parts of the body is a potentially danger operation.
For this reason absolutely necessary to AVOID TO INTRODUCING HANDS or other
parts of the body, INTO THE PROPELLER zone.
In case access here is needed for cleaning or undesired objects removal, use a
stick or a suitable tool.
•
Turn the switch (6-Fig.1) clockwise, completely, without forcing.
•
Grip the handle of the SCOOTER (1) or, if used, hook the carabiner to the towing harness.
•
Press the trigger (2) until the engine starts.
•
To stop the propeller, release the trigger (2).
