Subaru Tribeca 2012, Quick Reference Manual

Page: 238 / 578

Black plate (79,1)
北 米
Model "A3170BE-A" EDITED: 2011/ 7/ 12
WARNING
Do not attach accessories to the
windshield, or fit an extra-wide mir-
ror over the rear view mirror. If the
SRS airbag deploys, those objects
could become projectiles that could
seriously injure vehicle occupants.
!
Driver
’
s SRS frontal airbag
The driver
’
s SRS frontal airbag uses a
dual stage inflator. The inflator operates in
different ways depending on the severity
of impact, backward-forward adjustment
of the driver
’
s seat position and whether or
not he/she is wearing the seatbelt.
The backward-forward adjustment of the
driver
’
s seat position is monitored by the
driver
’
s seat position sensor under the
driver
’
s seat.
Whether or not the driver is wearing the
seatbelt is monitored by the seatbelt
buckle switch.
Observe the following precautions. Failure
to do so may cause the seatbelt buckle
switch and/or the seat position sensor to
malfunction, preventing the SUBARU ad-
vanced frontal airbag system from func-
tioning correctly or causing the system to
fail.
.
Do not place articles/metal objects or
install any accessory other than a genuine
SUBARU accessory under the driver
’
s
seat. Do not allow the rear seat occupant
to kick the driver
’
s seat or push up its
bottom surface with his/her feet.
.
Do not place a magnet near the
seatbelt buckle or under the driver
’
s seat.
If the seatbelt buckle switch and/or the
driver
’
s seat position sensor have failed,
the SRS airbag system warning light will
illuminate. Although the driver
’
s SRS
frontal airbag can deploy regardless of
the backward-forward adjustment of the
driver
’
s seat position even when the
warning light illuminates, have the system
inspected by your SUBARU dealer im-
mediately if the SRS airbag system warn-
ing light illuminates.
NOTE
The driver
’
s SRS side airbag, SRS
curtain airbag and seatbelt preten-
sioner are not controlled by the
SUBARU advanced frontal airbag sys-
tem.
!
Front passenger
’
s SRS frontal air-
bag
The front passenger
’
s SRS frontal airbag
uses a dual stage inflator. The inflator
operates in different ways depending on
the severity of impact.
The total load on the seat is monitored by
the occupant detection system
’
s weight
sensor located under the seat.
The system has another sensor that
monitors the tension of the front passen-
ger seatbelt. Using the total seat load and
seatbelt tension data from the sensors,
the occupant detection system determines
whether the front passenger
’
s SRS frontal
airbag should or should not be inflated.
The occupant detection system may not
inflate the front passenger
’
s SRS frontal
airbag even when the driver
’
s SRS frontal
airbag deploys. This is normal.
Observe the following precautions. Failure
to do so may prevent the SUBARU
advanced frontal airbag system from
functioning correctly or cause the system
to fail.
Seat, seatbelt and SRS airbags
1-51
–
CONTINUED
–
1