Subaru Tribeca 2012, Quick Reference Manual

Page: 415 / 578

Black plate (262,1)
北 米
Model "A3170BE-A" EDITED: 2011/ 7/ 12
7-12
Starting and operating
2. Remove the circuit board from the
bottom half of the case and slide the white
plastic battery holder out from under the
battery tab releasing the batteries. Re-
move the old batteries and replace with
new ones. Be sure to observe the (+) sign
on the old batteries before removing them
to ensure that the new batteries are
inserted properly (battery
“
+
”
should be
pointed away from the transmitter circuit
board on both batteries).
3. Carefully snap the case halves back
together, then test the remote engine start
system.
NOTE
This device complies with Part 15 of
the FCC Rules and with RSS-210 of
Industry Canada. Operation is subject
to the following two conditions: (1) This
device may not cause harmful inter-
ference, and (2) this device must
accept any interference received, in-
cluding interference that may cause
undesired operation.
Changes or modifications not ex-
pressly approved by the party respon-
sible for compliance could void the
user
’
s authority to operate the equip-
ment.
Automatic transmission
The automatic transmission is electroni-
cally controlled and provides 5 forward
speeds and 1 reverse speed. Also, it has a
manual mode and a SPORT mode.
WARNING
Do not shift from the
“
P
”
or
“
N
”
position into the
“
D
”
or
“
R
”
position
while depressing the accelerator
pedal. This may cause the vehicle
to jump forward or backward.
CAUTION
.
Shift into the
“
P
”
or
“
R
”
position
only after the vehicle is comple-
tely stopped. Shifting while the
vehicle is moving may cause
damage to the transmission.
.
Do not race the engine for more
than 5 seconds in any position
except the
“
N
”
or
“
P
”
position
when the brake is set or when
chocks are used in the wheels.
This may cause the automatic
transmission fluid to overheat.
.
Avoid shifting from one of the
forward driving positions into the