Subaru Tribeca 2012, Quick Reference Manual

Page: 318 / 578

Black plate (159,1)
北 米
Model "A3170BE-A" EDITED: 2011/ 7/ 12
&
Daytime running light system
WARNING
The brightness of the illumination of
the high beam headlights is reduced
by the daytime running light system.
The light switch must always be
turned to the
“ ”
position when it
is dark outside.
The high beam headlights will automati-
cally illuminate at reduced brightness
when the engine has started, under the
following conditions.
.
The select lever is in a position other
than the
“
P
”
position.
.
The parking brake is fully released.
.
The light switch is in the
“
OFF
”
or
“ ”
position.
NOTE
When the light switch is in the
“ ”
position, the front side marker lights,
parking lights and license plate lights
are also illuminated.
Turn signal lever
To activate the right turn signal, push the
turn signal lever up. To activate the left
turn signal, push the turn signal lever
down. When the turn is finished, the lever
will return automatically. If the lever does
not return after cornering, return the lever
to the neutral position by hand.
To signal a lane change, push the turn
signal lever up or down slightly and hold it
during the lane change. The turn signal
indicator lights will flash in the direction of
the turn or lane change. The lever will
return automatically to the neutral position
when you release it.
Illumination brightness con-
trol
When the light switch is in the
“
OFF
”
position, you can adjust the brightness of
the instrument panel illumination for better
visibility.
The brightness of audio, air conditioner,
multi-function display (if equipped) and
instrument panel illumination automati-
cally dims when the light switch is in the
“ ”
or
“ ”
position. You can adjust
brightness of the illumination for better
visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
Instruments and controls
3-29
–
CONTINUED
–
3