Subaru Tribeca 2012, Quick Reference Manual

Page: 199 / 578

Black plate (40,1)
北 米
Model "A3170BE-A" EDITED: 2011/ 7/ 12
1-12
Seat, seatbelt and SRS airbags
&
Head restraint adjustment
Both the second-row window side seats
and the second-row center seat are
equipped with head restraints.
WARNING
.
Never drive the vehicle with the
head restraints removed because
they are designed to reduce the
risk of serious neck injury in the
event that the vehicle is struck
from the rear. Therefore, when
you remove the head restraints,
you must reinstall all head re-
straints to protect vehicle occu-
pants.
.
All occupants, including the dri-
ver, should not operate a vehicle
or sit in a vehicle
’
s seat until the
head restraints are placed in their
proper positions in order to mini-
mize the risk of neck injury in the
event of a crash.
!
Window side seats
1) Head restraint
2) Release button
To remove:
While pressing the release button, pull out
the head restraint.
To install:
Install the head restraint into the holes that
are located on the top of the seatback until
the head restraint locks.
!
Center seat
CAUTION
The head restraint is not intended to
be used at the lowest position.
Before sitting on the seat, raise the
head restraint to an appropriate
position depending on your sitting
height.
A) When not used (retracted position)
B) When used (extended position)