Black plate (403,1)
一
般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
!
Changing the coolant
2.0-liter and 2.5-liter models
3.0-liter models
1)
Drain plug
Change the engine coolant using the
following procedures according to the
maintenance schedule.
1. Remove the under cover.
2. Place a proper container under the
drain plug and loosen the drain plug.
3. Loosen the radiator cap to drain the
coolant from the radiator. Then drain the
coolant from the reserve tank. Tighten the
drain plug securely.
WARNING
Never attempt to remove the radia-
tor cap until the engine has been
shut off and has cooled down
completely. Since the coolant is
under pressure, you may suffer
serious burns from a spray of boil-
ing hot coolant when the cap is
removed.
4. Install the under cover.
Non-turbo models
1)
Fill up to this level
Turbo models
1)
Fill up to this level
5. Slowly pour the coolant and fill to the
radiator filler neck and to the reserve
Maintenance and service
11-25
–
CONTINUED
–
11
