Black plate (31,1)
一
般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
To adjust the seat height, pull up or push
down the rear end of the control switch.
!
Reclining the seatback
To adjust the angle of the seatback, move
the control switch forward or backward.
WARNING
To prevent the passenger from slid-
ing under the seatbelt in the event of
a collision, always put the seatback
in the upright position while the
vehicle is in motion. Also, do not
place objects such as cushions
between the passenger and the
seatback. If you do so, the risk of
sliding under the lap belt and of the
lap belt sliding up over the abdomen
will increase, and both can result in
serious internal injury or death.
!
Memory function (if equipped)
Two of your desired seat positions can be
registered. Register the seat position with
button
“
1
”
or
“
2
”
and retrieve the seat
position by pressing either button.
The following seat positions can be
registered:
.
Forward/backward position of the seat
.
Angle of seatback
.
Angle of seat cushion
.
Height of seat
!
Registration of seat position
WARNING
.
Never adjust the seat while driv-
ing to avoid the possibility of
loss of vehicle control and of
personal injury.
.
Before adjusting the seat, make
sure the hands and feet of rear
seat passengers or luggage are
clear of the adjusting mechan-
ism.
1. While the transmission shift lever is in
the
“
N
”
position (MT vehicle) or the
selector lever is in the
“
P
”
position (AT
vehicle), and the parking brake lever is
applied, adjust the seat position.
2. Adjust the seat position.
Seat, seatbelt and SRS airbags
1-5
–
CONTINUED
–
1
