Black plate (149,1)
一
般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
4. Select
“
ON
”
for activated initial move-
ment or
“
OFF
”
for deactivated initial move-
ment by pressing the
“ ”
or
“ ”
switch.
And press the
“
/SET
”
switch to decide
the desired setting.
If you do not need to change the previous
setting, select
“ ”
and press the
“
/SET
”
switch.
5. Select
“
End
”
by pressing the
“ ”
or
“ ”
switch. And press the
“
/SET
”
switch
to finish the meter setting menu.
NOTE
.
Your vehicle
’
s initial movement
setting of the meter/gauge needles
has been set for activation
“
ON
”
at
the time of shipment from the factory.
.
If you turn the ignition switch to the
“
Acc
”
position, turn the ignition switch
to the
“
LOCK (off)
”
position, or open
and close the driver
’
s door during the
setting procedure, the new setting will
be canceled.
.
It is not possible to cancel sequen-
tial illumination of the combination
meter while sequential illumination is
actually taking place. Cancel sequen-
tial illumination when regular illumina-
tion (for driving) has begun.
!
Date/Time settings
The following items can be set or regis-
tered in the
“
Date/Time
”
setting menu.
.
Present date & time
.
Birthday
.
Anniversary
NOTE
To enter
“
Birthday
”
and
“
Anniversary
”
,
“
Present date & time
”
must be set.
To enter the
“
Date/Time
”
setting menu,
take the following steps.
1. Within 12 seconds after turning on the
ignition switch, press the
“
/SET
”
switch
for at least 2 seconds.
Instruments and controls
3-19
–
CONTINUED
–
3
