Black plate (223,1)
一
般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
NOTE
When you adjust the audio system, if
you press the
“
TONE
”
or
“
BAL
”
button
for more than 1 second or do not
operate it for more than 5 seconds, it
returns to its original display.
&
Sound effect setting
The optimum sound effect setting can be
selected according to the difference in
vehicle type such as sedan and wagon,
interior type.
!
Selecting sound effect
1. Press the
“
ON/OFF
”
button to turn the
power OFF.
2. While pressing the
“
T/B
”
button, press
two numbers on the preset button at the
same time. The setting will be changed
and displayed in the display area.
The applicable preset button numbers and
settings are listed below.
Preset button
Setting
*
1
&
*
3
WAGON - CLOTH SEAT
*
2
&
*
3
WAGON - LEATHER SEAT
*
1
&
*
4
SEDAN - CLOTH SEAT
*
2
&
*
4
SEDAN - LEATHER SEAT
Radio operation (Type A
audio)
&
Waveband selection
!
Waveband
Press the
“
FM
”
or
“
AM
”
button to select the
desired waveband. Each time you press
the button, the waveband will change to
the next one in the following sequence.
The selected waveband will be shown on
the display.
.
AM
.
FM
&
Tuning
!
Manual tuning
Push the tuning button marked
“
”
to
increase the tuning frequency, and press
the tuning button marked
“
”
to de-
crease it.
Each time the button is pressed, the
frequency changes 0.05 MHz in the FM
waveband, 9 kHz in the MW waveband
and 1 kHz in the LW waveband.
Constant pressure on the button causes a
continuous change in the frequency.
Audio
5-11
–
CONTINUED
–
5
