Subaru 2014 Impreza STI, Owner'S Manual

Page: 99 / 418

2-12
Keys and doors/Remote keyless entry system
ity reasons. It is recommended that you
have your dealer program all of your
transmitters into your system.
!
Programming the transmitters
The remote keyless entry system is
equipped with a special code learning
feature that allows you to program new
transmitter codes into the system or to
delete old ones. The system can learn up
to four unique transmitter codes. The four
transmitter codes may be the same or
different.
Programming transmitter codes into
system:
Bag containing transmitter
Transmitter circuit board
To register a new transmitter with the
remote keyless entry system, it is neces-
sary to program the transmitter
’
s code
(identification number) into the system. A
label showing the code is affixed to the
bag containing the transmitter, and an-
other is affixed to the circuit board inside
the transmitter. If there is no bag, open the
transmitter case and make a note of the
eight-digit number. Program the number
into the system in accordance with the
following procedure:
1. Firmly close the doors and the rear
gate, or trunk lid.
2. Open the driver
’
s door, sit in the
driver
’
s seat, and close the door.
3. Perform the following steps within 45
seconds.
(1) Open and close the driver
’
s door
once.
1) ON
2) LOCK
(2) Insert the key into the ignition
switch, then turn it from the
“
LOCK
”