Subaru 2014 Impreza STI, Owner'S Manual

Page: 211 / 418

5-28
Audio/USB storage device / iPod
®
operations (type B audio)
iPod
®
cannot be operated using the
click wheel on the iPod
®
(except some
models).
.
When using an iPod
®
by connecting
it to in-vehicle equipment, the order of
the list items displayed on the in-
vehicle equipment may be different
from that on the iPod
®
. However, this
does not indicate a malfunction.
.
An iPod
®
battery that is connected
to in-vehicle equipment will be charged
when the ignition switch is in the
“
ON
”
or
“
Acc
”
position. However, activation
of the iPod
®
may be delayed if the
battery charge of the iPod
®
is low.
.
If an iPod
®
does not activate after
operation, disconnect the connection
cable from the iPod
®
and reset it. For
the resetting procedure, see the User
’
s
Guide of the iPod
®
.
.
If an iPod
®
and the connection cable
are connected improperly, the iPod
®
cannot be powered on or will not be
recognized by in-vehicle equipment. In
this case, disconnect the connection
cable from the iPod
®
, and then connect
it again.
Except STI
STI
The USB connector is located in the
center console. Use the connector to
connect a USB storage device / iPod
®
.
&
How to play back
1. Connect a USB storage device /
iPod
®
.
2. Press the button. Each time you
briefly press the button, the mode
changes in the following sequence.
*: Only when a Media Hub is connected.
When the USB/iPod
®
mode is selected,
the player will start playback of the USB
storage device / iPod
®
.
NOTE
.
Depending on the number of files
stored on the iPod
®
and the firmware
version, the iPod
®
may not activate
smoothly after operation or not work
properly.
.
Do not disconnect the connector
from the iPod
®
during iPod
®
operation.