Subaru 2014 Impreza STI, Owner'S Manual

Page: 201 / 418

5-18
Audio/CD player operation
!
Loading all the magazine (full disc
loading mode)
1. If you press and hold the button,
the player will produce beep sound and
will enter the full disc loading mode.
2. When the disc number indicator
flashes and
“
ALL LOAD
”
indicator illumi-
nates, insert a disc within 15 seconds. If a
disc is successfully loaded during this
period, the disc number indicator will stop
blinking and will steadily light.
3. When the loading of a disc is com-
plete, the next disc number indicator will
blink. Then repeat step 2.
4. When the magazine is filled with discs
by repeating steps 2 and 3, the player will
start playback of the discs, beginning with
the one inserted first.
If you fail to insert any disc during each 15
seconds interval, the full disc loading
mode will be canceled, and the player will
start playback of the disc inserted first.
&
How to insert a CD (type B)
Hold the disc with a finger in the center
hole while gripping the edge of the disc,
then insert it into the slot (with the label
side up) and the player will automatically
pull the disc into position.
NOTE
DO NOT INSERT TWO DISCS INTO THE
DISC INSERTION SLOT AT THE SAME
TIME.
&
How to play back a CD
!
When there is no CD inserted
Properly insert a CD. Refer to
“
How to
insert a CD(s) (type A)
” F
5-17/
“
How to
insert a CD (type B)
” F
5-18.
When a CD is loaded, the player will start
playback of the CD, beginning with the
first track.
!
When there are CDs loaded (type A)
Press the preferred disc select button
(from
to ). If a disc is loaded
in any slot, the corresponding disc number
indicator will be constantly illuminated.
The player will then start playback of the
selected CD, beginning with the first track.
If a disc that the player cannot read has
been loaded, the player will display the
message
“
CHECK DISC
”
.
!
When CD is in the player (type B)
Each brief press of the button
changes the modes in the following
sequence.
When the CD mode is selected, the player
will start playback.
&
To select a track from the
beginning
Type A audio
Type B audio
Turn the
“
TUNE/TRACK/CH
”
dial clock-
wise to skip to the beginning of the next
track/file. Each time the dial is turned, the
indicated track/file number will increase.
Turn the
“
TUNE/TRACK/CH
”
dial counter-
clockwise to skip to the beginning of the
current track/file. Each time the dial is
turned, the indicated track/file number will
decrease.