Subaru 2014 Impreza STI, Owner'S Manual

Page: 174 / 418

inlet selection button in the ON
position may fog up the windows.
Switch to the OFF position as soon
as the outside dusty condition
clears.
&
Air conditioner operation
!
Cooling or dehumidifying
1) ON position
For cooling and dehumidification of the
passenger compartment, performing the
following steps will allow air to flow
through the instrument panel outlets:
1. Set the air inlet selection button to the
OFF position.
2. Set the airflow control dial to the
“ ”
position.
3. Set the air conditioner button to the
“
ON
”
position.
4. Set the temperature control dial to the
blue side.
5. Set the fan speed control dial at the
highest speed.
!
Defrosting or defogging
To direct warm air to the windshield and
front door windows:
1. Set the airflow control dial to the
“ ”
position.
2. Set the temperature control dial to the
red side.
3. Set the fan speed control dial at the
highest speed.
The air conditioner compressor automati-
cally operates when the airflow control dial
set in the
“ ”
or
“ ”
position to provide
better defogging performance.
Climate control/Manual climate control system
4-7