subzero.com | 9
Storage
Freezer Storage
FREEZER STORAGE DRAWERS
To remove a freezer drawer:
1
Pull the drawer open until it stops.
2
Locate the two plastic tabs at the front of the drawer
behind the bottom corners.
3
Pull the tabs forward, then lift up and out. Refer to the
illustrations below.
If the door opening is limited to 90°, the top drawer must
be removed before removing the middle or lower drawer.
To install a freezer drawer:
1
Push the drawer slides in.
2
Align the drawer with the slides and push back until it
stops.
3
Press down on the front of the drawer to engage the
slides.
TAB
Column freezer drawer
Freezer drawer tab
ICE BIN
To remove the ice bin (column model):
1
Pull the freezer drawer open until it stops.
2
Lift the ice bin out. Refer to the illustration below.
To remove the ice bin (tall and drawer models):
1
Pull the freezer drawer open until it stops.
2
Lift the ice bin out. Refer to the illustration below.
Column ice bin
Tall and drawer ice bin
Humidity
HUMIDITY CONTROL
Some foods, particularly vegetables, require enhanced
levels of humidity to maximize freshness. The refrigerator
drawer humidity level is adjustable. Select “Enhanced“ to
make sure produce lasts to its full potential. All drawers are
set to the same level and cannot be adjusted individually.
To adjust humidity:
1
Touch
.
2
Touch
.
3
Touch to toggle between settings.
Temperature
TEMPERATURE CONTROL
To optimize food preservation, the refrigerator drawer
temperature is adjustable automatically or manually. All
drawers are set to the same temperature and cannot be
adjusted individually.
Auto Mode—
automatically adjusts the refrigerator drawer
temperature 2° below the refrigerator set temperature, but
cannot go below 1°C.
Manual Mode—
manually adjust the refrigerator drawer up
to 2° above or below the refrigerator setpoint, but cannot
go below 1°C or above 6°C.
To adjust temperature:
1
Touch
.
2
Touch
.
3
Touch “A“ or “M“ to toggle between modes.
4
Touch + or – to adjust the temperature manually.
Product Operation
