Suaoki BT02-Z6.0A-P1, User Manual

Page: 8 / 41

• Keep all safety devices, air vents and the motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean cloth or blow it with compressed air at low
pressure.
• We recommend that you clean the device immediately each time you have finished using it.
• Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning
agents or solvents, these could attack the plastic parts of the equipment. Ensure that no water
can seep into the device. The ingress of water into an electric tool increases the risk of an
electric shock.
• The charger should be placed in a dry room for storage. Any corrosion must be cleaned off
the charging terminals.
8. Troubleshooting
If the equipment is operated properly you should experience no problems with malfunctions or
faults. In the event of any malfunctions or faults, please check the following before you contact
your customer services.
9. Package Includes
1 x Car Battery Charger
1 x Battery Clamp
1 x Eyelet Terminal Connector
1 x User Manual
1 x Thank You Card
10. Warranty & Contact Us
Our company provides customers with a warranty of 12 months from the date of purchase.
For any inquiries or comments concerning our products, please send an email to
support@suaoki.com, and we will respond to you as soon as possible
Fault Possible cause Remedy
Charger clamps connected
incorrectly
Contact between the charger
Clamps
Battery defective
Connect the red clamp to the
positive pole and the back clamp to
the bodywork
Prevent contact
Have the battery checked by an
expert and replace it if necessary
Equipment does
not charge up
EN-6