Stuv 16-cube Series, Installation Manual

Page: 40 / 48

40
7
MAINTENANCE STÛV 16-CUBE & 16-H
Step 8
Several of the door parts can be
modified. Here are the three work areas.
Step 9
The first part that can be removed
is the closing axis. This pin along the frame
can be unlocked by removing two screws.
Step 10
Remove the closing axis by lifting
the bottom part and sliding it upward, out
of the door frame.
closing
axis
spring
upper
pivot
7 6 5
Step 5
Place the door on a protective
fabric to protect the paint and to be
able to continue disassembling it more
comfortably.
For all maintenance performed on the
door's components
, follow the next steps
until you reach the component to service
or change.
Step 6
Locate the black door seal in the
gasket clamps.
Step 7
Gently pull on the seal to remove.
10 9 8
T25
.2 REPLACING COMPONENTS