Stuv 16-cube Series, Installation Manual

Page: 28 / 48

28
4
INSTALLATION STÛV 16-CUBE & 16-H
Step 32
To adjust the door's grip or
airtightness, slightly loosen the 4 bolts
holding the door filler plate reinforcements
at the top and bottom.
A
If the grip is too tight, the door filler plate
reinforcement cylinder has to be pushed
outward.
B
If the grip is too loose, the cylinder has
to be pushed inward.
Gradually
adjust the door according to
the above instructions and then tighten
the bolts.
Step 33
Recheck the airtightness by
placing a sheet of paper in the door and
closing it. Try to pull the paper out all along
the door frame.
Step 34
Redo the adjustment steps
until the door is airtight, level and has a
pleasant grip.
If it seems impossible to adjust the door,
contact Stûv America's customer service
department at 1-866-487-7888.
Step 35
Re-engage the spring, then close
and lock the door. Position the flap if you
have not already done so.
A B
33 35 34
32
.6 ADJUSTING THE DOOR