Page 15
The current value for the specification will be displayed
when the item is open. The Up and Down buttons
increase or decrease the setting value by one second.
The Left and Right buttons increase and decrease the
setting by 100 seconds with each press of the button.
When the desired value is displayed, press the Enter
button to set the value and return to the programming
menu. To exit this item without changing the value, press the Escape button.
Programming the TCV Beep Setting
The Beeper in the TCV can be programmed to activate under varying conditions. The available
options are:
•
Off (Never)
•
Accept (cycle) and Reject (cycle)
•
Batch (completion) and Reject (cycle)
•
Reject only
The Beep Setting may be accessed when the item is
active in the main programming menu by pressing the
Enter button.
The current beeper setting will be displayed. Press
any arrow button (UP, Down, Left, Right) to scroll
through the available options. When the desired set-
ting is displayed, press the Enter button to activate
that setting and exit this item. This item may be exited without change by pressing the Escape
button.
Programming - Resetting the Total and Batch Counts
The Batch Count and the Total (cycle) Count can both
be reset. To reset either or both counts, press the
Enter button to access this function.
The display will show the two counts, both on the sec-
ond line of the new display. To reset the Total Count,
press the Up button. To reset the Batch Count press
the down button. Press the Enter button to active your
selection and return to the main program selections.
Press the Escape button to exit without resetting.
Summary of Contents for 10469
Page 2: ......
Page 32: ...Page 30 Dimensions...
