E/1203/30A/28
10.6 EVAPORATOR
This is the part where the transfer of the heat, contained in the air in the cabinet, to the refrigerant
gas takes place .
It consists of copper pipes and aluminium fins.
(suitable only for non-corrosive and non-salty environments)
11. Motors
11.1 COMPRESSOR
Electric motor with a squirrel cage rotor, positioned inside the compressor and cooled by the air
flow. It is mounted on anti-vibration springs to reduce vibrations.
11.2 FANS
These may be of different types depending on the model. They are either:
- multiblade axial, with outside rotor on bearings, dynamically balanced;
- compact axial, on bearings;
- radial, with plastic or metal rotor, on bearings;
These fans are manufactured in accordance with Standard EN 60 335 1. They are treated with
anticorrosion plastic materials, with class B insulation and class 1 protection.
The motor protection is IP44, in accordance with Standard DIN40500 whereas the safety rate
complies with Standards DIN30110.
Noise levels are consistent with Standard DIN 45635.
Summary of Contents for CVC 07 001yy
Page 2: ...E 1203 30A 2...
