Issue 3, August 2021
Model 5402 User Guide
Page 30
Studio Technologies, Inc.
Model 5402
DANTE LEADER CLOCK WITH GNSS SYNCHRONIZATION
utilizes for Dante interconnectivity. No date is associated
with this file. The displayed version number is assigned by
Audinate and can’t be changed by Studio Technologies.
It is incorporated into the Dante Product (.dnt) file that is
released by Studio Technologies’ specifically for the Model
5402. As noted previously, this firmware, part of the Dante
product firmware, can be updated by way of an Ethernet
connection using the Dante Updater software application.
GNSS Firmware:
This display-only field shows the ver-
sion number of the firmware associated with the Model
5402’s GNSS receiver circuitry. This firmware cannot be
field updated.
Restore Default Settings:
The Restore Default Settings
function allows many of the Model 5402’s default configu-
ration settings to be restored. However, it will not impact
the network configuration or user name and password
settings. For the defaults to be restored the associated
check box must be enabled prior to pressing the Submit
button. Be careful when using this function as invoking it
after enabling the check box will immediately cause the
defaults to be restored. Refer to Appendix E for a list of
the default values.
System Reboot:
The Reboot function is located on the
bottom of the System menu webpage. It allows the Model
5402 to be rebooted (restarted) without having to perform
a power cycle. (The function can be considered to invoke
a “cold boot.”) For a system reboot to take place the check
box must be enabled prior to pressing the Reboot button.
During normal operation a system reboot will never be
required. But after changes are made to any of the unit’s
management interface network configuration a reboot is
required. A system reboot will cause the three Ethernet
interfaces to go through a reconnection process, neces-
sary should any of the management network parameters
be revised. (These changes can be made by way of the
Network menu choices or using the front-panel display
and buttons.)
