Issue 3, August 2021
Model 5402 User Guide
Page 44
Studio Technologies, Inc.
Model 5402
DANTE LEADER CLOCK WITH GNSS SYNCHRONIZATION
Front-Panel Display:
backlit LCD
Front-Panel LEDs:
9, dual-color
Functions:
provides indication of condition of incoming
AC and DC power, status of three Ethernet interfaces,
status of Dante connectivity, status of GNSS receiver,
and status of sync input
Software Updating:
USB flash drive supports updating
of Main MCU, Main FPGA, and Sync FPGA firmware
(embedded software); Dante interface updated via
Ethernet interface
Power Sources:
AC Mains:
100 to 240 V, 50/60 Hz, 5 W maximum
DC:
10 to 18 V, 0.5 A max: 110 uA maximum with 12 volts
DC and AC mains present, 190 uA maximum with 18 volts
DC and AC mains present
Connectors:
GNSS Antenna:
SMA jack
Sync Input, Word Clock Output:
2, BNC jack (female
connector), per IEC 61169-8 Annex A
Ethernet:
3, RJ45 jack
USB:
type A receptacle (used only for updating firmware)
DC Input:
4-pin male XLR (pin 1 negative, pin 4 positive)
AC Mains Input:
3-blade male, IEC 320 C14-compatible
(mates with C13)
Included Accessories:
high-precision, multi-band
GNSS antenna with 5-meter (16.3 foot) cable terminated
with SMA plug. Mounts magnetically to metal surface
or secured using two 4.5 mm pitch machine screws.
(Hardware not included.)
Environmental:
Operating Temperature:
0 to 50 degrees C (32 to
122 degrees F)
Storage Temperature:
–40 to 70 degrees C (–40 to
158 degrees F)
Humidity:
5 to 95%, non-condensing
Altitude:
not characterized
Dimensions (Overall):
19.00 inches wide (48.3 cm)
1.72 inches high (4.4 cm)
7.9 inches deep (20.1 cm)
Mounting:
one space (1U) in a standard 19-inch rack
Weight:
3.0 pounds (1.4 kg)
Specifications and information contained in this User
Guide subject to change without notice.
