Stuart PH35, Installation, Operation & Maintenance Instructions Manual

Page: 5 / 8

- 5 -
Cont ...
5 TECHNICAL SPECIFICATION
Stuart Turner reserve the right to amend the specification in line with its policy of
continuous development of its products.
*Note: Max working pressure is the maximum pressure that can be applied to
the pump internal casing under any installation conditions.
**Note: In normal circumstances the temperature of stored water should never
exceed 65 °C. A stored water temperature of 60°C is considered
sufficient to meet all normal requirements and will minimise deposition of
scale in hard water areas.
5.11
Noise:
The equivalent continuous A-weighted sound pressure level at a distance
of 1 metre from the pump does not exceed 70 dB(A).
Model PH35 PH45
Electrical
Power supply
Volts/phase frequency
230/1/50 230/1/50
Enclosure IPX4 IPX4
Type of motor Induction Induction
Power consumption 380Watts 540 Watts
Full load current 1.6 Amps 2.4 Amps
Rating Continuous (S1) Continuous (S1)
Max. No Starts per hour 60 60
Mechanical
Min inlet head 1 metres 1 metres
Max inlet head 10 metres 10 metres
Max head (closed valve) 25 metres 42 metres
Max working pressure* 600 kPa (6.0 bar) 900 kPa (9.0 bar)
Max ambient air temperature 50 o C 50 o C
Max water temperature** 80 o C 80 o C
Min water temperature 4
o
C 4
o
C
Cut in flow 1 l/min (approx) 1 l/min (approx)
P
ump
Dimensions
Length (max) 241 mm 270 mm
Width (max) 130 mm 130 mm
Height (excluding flexible hoses) 167 mm 167 mm
Gross Weight (including accessories) 4.9 Kg 6.5 Kg
Pump Connections: Inlet G 1 Female G 1 Female
Outlet G 1 Female G 1 Female
Materials
Body Brass Brass
Shaft Stainless Steel Stainless Steel
Mechanical Seal Nitrile/carbon/ceramic Nitrile/carbon/ceramic