background image

- 6 -

6  YOUR 1 YEAR GUARANTEE

Stuart Pumps are guaranteed by Stuart Turner Limited to be free from defects in 
materials or workmanship and the guarantee period starts from the date of purchase 
or date of manufacture. Within the guarantee period we will repair, free of charge, 
any defects in the pump resulting from faults in material or workmanship, repairing, 
exchanging parts or exchanging the whole unit as we may reasonably decide.

Not covered by this guarantee: Damage arising from incorrect installation, improper 
use, unauthorised repair, normal wear and tear and defects which have a negligible 
effect on the value or operation of the pump.

Reasonable evidence must be supplied that the pump has been purchased within  the 
applicable guarantee period prior to the date of claim (such as proof of purchase or the 
pump serial number).

In the event of a claim please telephone Stuart Turner Limited on 0844 980 0097 
before taking any further action.  If you have any doubt about removing a pump, please 
consult a professional.

Proof of purchase should accompany the returned pump to avoid delay in investigation 
and dealing with your claim.

Please record here for your records.

TYPE NO.

SERIAL NO.

DATE PURCHASED

Summary of Contents for PH35









Reviews: