- 12 -
Stuart Turner reserve the right to amend the specification in line with its policy of
continuous development of its products.
*Note: The maximum pressure that can be applied to the pump under any
installation conditions.
**Note: With footvalve fitted.
5.11
Noise:
The equivalent continuous A-weighted sound pressure level at a
distance of 1 metre from the pump does not exceed 70 dB(A).
5 TECHNICAL SPECIFICATION
Pump Model
PH 35 ES
50 Hz
46563
PH 35 ES
50 Hz
46451
PH 45 ES
50 Hz
46564
PH 45 ES
50 Hz
46454
General
Guarantee
2 years
WRAS approval
Approved materials
Approvals
CE
Features
Pump type
Peripheral
Priming vent plug
ü
ü
ü
ü
Typical noise
61 dB(A)
64 dB(A)
Materials
Pump body
Brass
Impeller
Brass
Mechanical seal
EPDM / PTFE /
Al. Oxide
Viton / Carbon /
Silicon Carbide
EPDM / PTFE /
Al. Oxide
Viton / Carbon /
Silicon Carbide
Performance Maximum head - closed valve
3.0 bar / 30 metres
4.2 bar / 42 metres
Performance @ 9 l/min
2.0 bar / 20 metres
3.2 bar / 32 metres
Performance @ 18 l/min
1.2 bar / 12 metres
2.3 bar / 23 metres
Maximum flow
32 l/min
40 l/min
Minimum static inlet pressure
0.05 bar (0.5 metres)
Maximum static inlet pressure
1.4 bar (14 metres)
Maximum working pressure*
600 kPa (6 bar)
Maximum viscosity
50 secs redwood no. 1 9.5 centistokes
Max. ambient air temperature (continuous)
40
o
C
40
o
C
40
o
C
40
o
C
Max. ambient air temperature (intermittent)
50
o
C
n/a
50
o
C
n/a
Min / Max water temperature
Min 4
o
C / Max 80
o
C
Maximum suction lift**
4.6 metres
Connections
Pump connections
G 1 female
Motor
Type
Induction, auto-reset thermal trip
Duty rating
Continuous (S1) @ 5 l/min and above
Electrical
Power supply (Vac/Ph/Hz)
230 V a.c. / 1 / 50 Hz
Power consumption - P1
450 Watts
665 Watts
Current - full load
1.95 Amps
2.9 Amps
Fuse rating
5 Amps
Power cable length
1.5 metres (pre-wired)
Physical
Enclosure protection
IP44
Length
241 mm
257 mm
Width
132 mm
Height - excluding hoses
169 mm
Weight - including fittings
4.6 Kg
6.2 Kg
Summary of Contents for PH 45 TS S
Page 15: ...15 NOTES...
