SMD-300 Selective Pulse Metal-Detector User Manual
STT Group - Special Technique & Equipment
Moscow
Russia 55
- Compare the data obtained with the reference info.
If these parameters are practically the same or close to that –
this might testify to the items identity.
Pass to the main menu:
-
select
EXIT
in a screen bottom line by means of ► ◄
button and press
ENTER
button;
- Keeping Sensor position invariable, switch on
COMPENSATION EMI
mode and wait for its completion.).
Continue searching process
.
Place Sensor unit over the next item to be controlled,
similar to the reference one.
Watch over the geometric centre of Sensor - it should be above
the centre of the item.
Note every alteration in
measured parameters.
They might signify that the
item under control has
certain
insertion
or
irregularity like concealed
‘bug’ (fig. 56).
Concealed ‘bug’
Fig. 56
