SMD-300 Selective Pulse Metal-Detector User Manual
STT Group - Special Technique & Equipment
Moscow
Russia 61
Green LED will die but Yellow LED will shine in confirmation
(fig.66). Current battery-charging-status will be displayed by
LCD
After „discharge‟ mode completion the device switchs over to a
„charge‟ one automatically.
NOTE : It’s highly recommended to use ‘Refresh’ mode every
time you charge the battery – that will substantially extent
battery’s life.
Refer Charger User’s Manuals (supplied)
for complete info
.
C
AUTION
:
- It is not advisable to store batteries in a discharged state.
- Store rechargeable batteries in fully charged state.
- Use only the charger from the kit supplied.
- Avoid battery terminals from short circuit.
- Don't store ‘SMD-300’ Main Unit coupled with the battery.
- Finishing operation disconnect it from the Main unit.
USEFUL HINTS:
If ‘SMD-300’Detector is unused the batteries should be
charged every 6 months in case of storage temperature less
then +25°С, and every month if storage temperature range is
from +25°С to +40°С
