SMD-300 Selective Pulse Metal-Detector User Manual
STT Group - Special Technique & Equipment
Moscow
Russia
36
As long as the shape of detected item‟s housing is represented
by „virtual metallic plate‟ or „plates‟ (N= from 1 to 3, where
„N‟ stands for a number of plates).
In that case the table consists of item‟s parameters conformed
to each plate - see fig. 37 for your reference:
The following item’s parameters are displayed on a screen:
T, mks
– time parameter [microsecond];
NOTE: Time parameter value - ‘
T’
, under the rest equal status,
depends exclusively on the kind of a metal discovered during
the investigation. At that, T-value for ferrous metal is higher
while that for non-ferrous one is lower.
D, cm
– average cross-cut dimension;
Fig, 37
1-st plate parameters
2-nd plate parameters
